The 1st generation g1 trek and g1 cylq are semi-geodesic tents with 3 poles (or 4 poles for the g1 trek xt). These tents were manufactured between 2002-2004.


Please check your pole against the drawings above and technical specifications below before ordering. All dimensions are given in mm.


Please note that the price of each individual pole is £25 (VAT included) plus delivery charge. So, two poles, for example, will cost £50, three poles will cost £75, etc.

Generation

1st

Care & Maintenance

Poles require little or no maintenance, but there are two points one should be aware of.
1. Throwing a set of folded poles out so they all snap together may look impressive, but this can lead to damage at the ends and ultimately weaken the metal increasing the risk of a J-tear failure (refer to tent knowledge base).
2. Over time, the elastic cord holding all the poles together stretches, and the poles are not held together so tautly. There may come a point in time where the elastic needs to be shortened or replaced (refer to tent knowledge base).

Technical Specifications

The poles are 9.00 mm DAC Press-fit. (Lengths are given in mm).

Front pole: 3100 mm, colour green
(344-344-344-344-344-344-344-344-344)

2 x Diagonal poles: 3040 mm, colour grey
(334-334-334-334-334-334-334-334-334)

XT porch pole: 2670 mm, colour black
(327-335-335-335-335-335-335-327)
 

Dimensions: 50 cm × 5 cm × 5 cm
SKU: LW-TA-TP-1G-G1

G1 Models (02-04)

£25.00